When the full-height turnstiles, swing gates and three-roll gates are used, they will inevitably encounter some failures that will affect the normal operation of the gates. The common faults and solutions of full-height turnstiles, three-roll gates and other gates are summarized as follows:
1. The full height switch, swing gate, and three roller brakes have no indication of direction indicator after power on, and they cannot read the card. The main cause of this type of failure is the problem of the power supply system of the equipment. Care should be taken to check whether the fuses of the main controllers of the gate equipment are damaged, whether the connectors are loose, whether the power cord is disconnected, and so on.
2. The full-height gate, swing gate and three-roll gate will not open the gate after the card is read, but the manual or remote control can open the gate. The main cause of the failure is the disconnection of the card reading device and the gate control board or the fault of the read head. Contact related technical personnel to conduct careful inspection and inspection;
3. When the full-height turnstiles, swing gates and three-roll gates are powered on or during use, the gates cannot be reliably locked. This fault is mainly due to electromagnet damage, or the control program is disordered. The electromagnet and inspection control program should be promptly replaced. ;
4. Full-height turnstiles, swing gates and three-roll gates cannot properly read the card. The fault is mainly caused by the looseness of the connection between the card reading device to the main controller or the damage of the card reading device. When the card reading device is replaced, it should be performed. Equipment function test;
1. The full height switch, swing gate, and three roller brakes have no indication of direction indicator after power on, and they cannot read the card. The main cause of this type of failure is the problem of the power supply system of the equipment. Care should be taken to check whether the fuses of the main controllers of the gate equipment are damaged, whether the connectors are loose, whether the power cord is disconnected, and so on.
2. The full-height gate, swing gate and three-roll gate will not open the gate after the card is read, but the manual or remote control can open the gate. The main cause of the failure is the disconnection of the card reading device and the gate control board or the fault of the read head. Contact related technical personnel to conduct careful inspection and inspection;
3. When the full-height turnstiles, swing gates and three-roll gates are powered on or during use, the gates cannot be reliably locked. This fault is mainly due to electromagnet damage, or the control program is disordered. The electromagnet and inspection control program should be promptly replaced. ;
4. Full-height turnstiles, swing gates and three-roll gates cannot properly read the card. The fault is mainly caused by the looseness of the connection between the card reading device to the main controller or the damage of the card reading device. When the card reading device is replaced, it should be performed. Equipment function test;
Fluorescence filter is generally composed of excitation filter, emission filter and bidirectional spectroscope. It is a key component used in biomedical and life science instruments. Its main function is to separate and select the characteristic band spectra of excitation light and emission fluorescence of substances in the biomedical fluorescence inspection and analysis system.
Fluorescence Filter,Fluorescent Light Filter,Fluorescent Light Filter Glasses,Filters For Fluorescence Microscopy
Changchun Champion Optics Co.,Ltd , https://www.champion-optics.com