Common decoration wood introduction

The wooden decorative materials commonly found on the market today are mainly wooden man-made panels, artificial veneers, and assembled wood and wooden moldings.

(1) Wood-based panels Wood-based panels are boards made of wood, wood fibers, wood scraps or other plant fibers, plus adhesives and other additives. The main varieties of wood-based panels include veneers, plywood, blockboards, fiberboards and chipboards.

Plywood: Plywood is made up of more than three layers of veneer glue. It is divided into two types: broadleaf wood glue and plywood glue plywood.

Fibreboard: Fibreboard is a wood-based panel made from plant fibres such as wood, bamboo or other crop stems. Fiberboard is divided into three types: hardness fiberboard, semi-rigid fiberboard and soft fiberboard according to different properties.

Particleboard: Particleboard, also known as particle board, is a collective name for thin boards that use wood scraps as the main raw material, and applies glued materials and additives. The pressing method can be divided into two types: extruded particleboard and flat pressure particleboard.

Blockboard: The core board is made of spliced ​​wood boards, and the two surfaces are solid boards made of glued wood veneers, commonly known as large core boards.

Splintered wood: The corners made of wood are used as rest materials, which are chopped, dried, glued, and hot-pressed.

Wood wool board: also known as Wanli board, is the use of wood scraps, after the machine planing poplar wood, after the soaking of the chemical solution, and then mixed with cement, into the molding pressure, solidification, drying made.

(2) Artificial veneer panels The artificial veneer panels include decorative thin veneer panels and large varnish architectural decorative panels. Decorative thin wood plywood is a new type of advanced decorative materials. It is the use of precious tree species, such as teak, Ash, willow wood, etc., through precision cut into thin wood chips, plywood as a substrate, using advanced adhesive and adhesive process made. Lacquer architectural decoration board is one of China's unique decorative panels. It is made by coating our country's unique lacquer on a variety of wood bases.

(3) Assembled wooden floor Assembled wooden floor is a small piece of wood that has been processed into dried wood, such as ash, beech, walnut and teak. After they are assembled, they can form beautiful and elegant patterns.

(4) Moulding Mouldings are wooden plants that are hard, fine-grained, wear-resistant, corrosion-resistant, non-defective, with good cut-to-edge photo processing properties, good paint coloring, good adhesion, and strong nailing. After drying, it is machined or hand-machined. Mould lines include ceiling lines and ceiling corner lines.