Potassium dihydrogen phosphate. The usual concentration is 0.3%. Method: 100 g of water was added with 300 g of potassium dihydrogen phosphate, fully dissolved and sprayed.
Urea. Commonly used concentrations are 1% - 2%. When using it, it is important to note that if the content of diuretic in urea exceeds 1.5%, it will be toxic to crops. Therefore, foliar spray cannot be performed.
plant ash. The commonly used concentration is 5%-7%. It must be used for the preparation of grass ash and water, and it is allowed to stand for 15 hours after filtration and sprayed.
Superphosphate. The concentration was 2%, and the superphosphate was added with water and stirred well. After standing for 24 hours, the mixture was filtered, and the supernatant was sprayed.
Boron breaking (or boric acid) is usually used in a concentration of 0.2% to 0.3%. Method: First dissolve the borax with a small amount of hot water at 45 ° C, and then dilute with water.
Paclobutrazol. The fruit trees were sprayed with a solution of 1000-1500×10^-6, and the crops were sprayed with a 50×10^-6 solution.
Copper sulfate. Commonly used concentration is 0.02%-0.05%. When used, a small amount of lime liquid is added to the solution to avoid poisoning.
Manganese sulfate. Commonly used concentration is 0.05%-0. L%.
Zinc sulfate. The commonly used concentration is 0. L% - 0.2%, spray a small amount of lime solution in the solution.
Rice vinegar. Spray with 50-50-50 kg of water with 200-250 ml.
Ammonium molybdate. The legume crops are sprayed at a usual concentration of 0.05-0.1%.
Practical disposable transfer pipettes, made from natural low density polyethylene (LDPE). The transfer pipet is simple and safe to use with a long shelf life; no issues with broken glass, cracked or loose bulbs. Additional advantage is that with the single piece design lager amount can be transferred by allowing fluids in the bulb. These plastic transfer pipettes are ideal for transferring small amounts of fluids for microscopy sample preparations or to prepare mixtures or staining solutions. The extra fine tip enables transferring minute amount of fluids. These cost-efficient plastic transfer pipettes are disposable and intended for one-time use. Ideal for educational and research environments. Can be used for fluids up to 70°C, please take care to protect the fingers squeezing the bulb. Available in six sizes/styles: 0.5ml, 1ml, 2ml, 3ml, 5ml, 10ml.
Plastic Transfer Pipettes,Disposable Transfer Pipettes,Sterile Transfer Pipettes,Disposable Plastic Pipettes,3ml Pipette,5ml Plastic Pipette,Pasteur Pipettes
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyuetube.com