Myth 1: The longer the drying time, the better.
Quilts and pillows are not as long as possible. Because cotton is rich in natural oils, drying for too long will cause the oil to dry and age, affecting its adhesion and insulation properties. Generally, it is best to dry for 2~3 hours from 11:00 am to 2:00 pm. It is best to have a good light and dry, and it can avoid dust that is easily contaminated by drying for a long time.
Myth 2: Exposure to high temperature antivirus
Down and wool bedding does not require frequent drying and must not be exposed to the sun.
Down and wool bedding does not require frequent drying and must not be exposed to the sun. Because the high temperature during exposure causes the oil in the feathers and wool to change, resulting in rancid smell. This type of quilt can be aired for 1 hour in a ventilated place.
Myth 3: Beating the quilt is more fluffy
After drying the quilt, I like to beat and beat. I feel that it is clean and can make the quilt fluffy. In fact, it is not: 1. The cotton fiber is thick and short, brittle; 2. The synthetic fiber is thin and long, easy to deform, once beaten, the fiber is tightened. The board will not be restored after it is formed into a block; 3. The duvet can not be beaten, and the down is broken into a small "feather dust", which will affect the warmth effect.
1. Nylon foot
Nylon foot of office chair
Many customers subconsciously think that the nylon feet are not strong. In fact, manufacturers with a small office chair price of about 300 yuan have a warranty of three years. You can rest assured that you will go to the seat for three years, and there will be no after-sales treatment made by the manufacturer. If the price of the small office chair you buy is about 100 yuan and it is used for more than half a year, you will make a profit if it is not broken except for the feeling of sitting
2. Electroplating foot
Electroplating foot of office chair
Electroplating feet with office chairs are exquisite and beautiful, which is also the choice of most customers. Generally, office chair manufacturers mostly use office chairs.
3. Aluminum alloy foot
Aluminum alloy foot of office chair,Alloy Table Legs,Furniture Legs,aluminium extrusion desk Legs
Aluminum alloy feet are high-end and atmospheric grade, anti-corrosion, anti rust and anti scratch. General office chair manufacturers will use it in chairs of more than 600 yuan.
Aluminum alloy foot of office chair
One side of the aluminum alloy foot will be used on the functional chair.
Aluminium Furniture Legs,Furniture Legs,Alloy Table Legs,Aluminium Extrusion Desk Legs
GuangDong XinCheng Material CO.,LTD , https://www.xin-alu.com