At present, bedding on the market, everyone is clearly marked in the number of places, in fact, the number of yarn count is a more popular international saying, the domestic generally said how much density.
The main difference in bedding prices is not just how many yarn counts (just one of the most important factors). Of course, the price is mainly on the fabric.
Generally speaking, printing means that after the cloth is woven, the pattern is printed again, and there are active printing and general printing. The price of 30S printed bedding is about 100-250 yuan, and the good is also more than 400 yuan (refers to other index factors, such as yarn count, twill, cotton content, etc.).
Embroidery means that after the cloth is woven, the pattern is embroidered by the machine (generally). Compared with the printing, it does not fade when washed. The breathable moisture absorption is good. The price is generally above 400 yuan.
Jacquard is a pattern on the fabric that is woven with different colors of yarn when weaving. Compared with embroidered fabrics, the cost is higher, the quality and the air permeability are better. Therefore, the price is above 800 yuan.
When buying bedding products, especially high-end bedding products, do not blindly pursue high yarn counts. See what fabrics (in the end, printing, embroidering, or jacquard) is the dividing line of price.
MH slurry pump is single stage, cantilevered, horizontal, centrifugal High Pressure Slurry Pump. The MH High Head Slurry Pump is specifically designed to combat the need to run conventional design slurry pumps at excessive speeds to generate high heads and high efficiency often required in many modern slurry pumping applications used as the filter press feeding pump, SAG Mill Discharge Slurry Pump and Wet Crusher Slurry Pump etc.Single pump unit rather than series pumping can be adopted, at greatly reduced capital cost, while still offering optimum wear life and efficiency.
Pump Features
-High chrome alloy liners provide superior abrasion resistance & erosion resistance and maximum wear life
-Large diameter, high efficiency impellers designed to meet high head requirement, maximum wear life and low operating cost
-High head & high pressure
-Discharge branch can be positioned at intervals of 45 degrees
-The pump can be installed in multi-stage high pressure operation
-Easy to maintain
Application Range:
Discharge Size:1" to 6"
3 Capacity:16 to 1125 m /h
Head:12 to 95 m
Slurry Transfer Pump,Filter Press Feeding Pump,Discharge Slurry Transfer Pumps,Mill Dicharge Slurry Pump
SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com