When processing the long 3267mm drive shaft, our factory uses φ100mm and 203kg round steel turning. Due to the irregular outer circle of the shaft material during machining, the center drill is broken and the yield is very low. To this end, we designed a center hole drilling tool for the long axis drilling center hole (see figure), changing the original workpiece rotation to the center drill rotation, centered by the center drill. Drill motor P=250W, n=1360r/min, motor
- Brewster Windows (BW):Brewster windows are used for large angles of incidence so that they present a circular cross section to the incoming beam at the Brewster`s angle. These windows are polished to a laser grade finish on both sides. Please contact the Lambda`s sales team for more coating information.
- Elliptical Windows (EW):Elliptical windows are used for large angles of incidence so that they present a circular cross section to the incoming beam. They are offered for use at 45° and at Brewster`s angle. These elliptical plane windows are polished to a laser grade finish on both sides. Select a coating appropriate to your application or contact us with your special coating requirements.
- Square Windows (SWI):These square plane windows are polished to a laser grade finish on both sides. They are intended for transmissive use and are parallel to better than 3 arc minutes. Select a coating appropriate to your application or contact us with your special coating requirements.
-
Wedge Windows (WW):These general purpose plane windows are polished to λ / 10 flatness except where indicated otherwise. Wedge windows are ideally design for beam sampling applications. Please contact the Lambda`s sales team for more information.
Optical Windows,Wedge Window,Elliptical Window,Optical Optical Windows
Lambda Research Optics ChangChun,LTD. , https://www.lambdachina.com